Oil Cleaning Liquid

  • Home
  • Oil Cleaning Liquids

Oil Cleaning Chemicals- Water Based, Environment Friendly

Oil based fuels and lubricants are important consumables of most industries, especially hot forging, hot rolling and heat treatment. Oils have a tendencay to leak and dirty the shop floors, machinery and workmens’ hands. Environment-friendly, water based oil cleaning chemicals manufactured by SPS have proven to effortlessly clean all types of dirty oils, using water. They are found very useful in following applications:

a. Cleaning oil spilled on metallic chequered plates, epoxy floors and shop floors: Due to frequent oil spills on shop floor and mud deposits over it, a solid oil-mud cake gets formed. Our oil cleaning solution is able to dissipate this solid cake formation and dissolve the oil such that it can be washed off from the shop floor using water. If this exercise is repeated 2-3 times, you can expect an oil-free and dirt free, clean shop floor. Subsequent regular floor cleaning using small quantity of our oil cleaning solution will ensure that the shop floor is maintained oil-free, clean and neat.

b. Cleaning oil from plastic trays, crates and bins used for carrying oily metal products: Metallic bur and oil get deposited in plastic trays. These are difficult to remove. Many times, high-pressure washing-machines are used to clean such trays. The oil and metallic bur falls into these washing machines, causing choking of filters and stoppage. If plastic trays are dipped only for few minutes into our water-diluted oil-cleaning solution, the oil is cleaned and metallic bur falls off easily. Use of expensive tray washing machines could be avoided in many cases. In most cases, subsequent washing operations are much more effective. Problems of filter choking and excessive load on motor due to metallic dirt is avoided.

c. Cleaning of workmen’s hands: Use of sawdust and washing powder detergent for cleaning oily hands is not effective, neither environment friendly. It also leads to dryness and scaling of hands. As opposed to this, use of our oil cleaning solution effectively dissolves the oil and does not cause harm to hands.

d. Cleaning of oil from machinery without damaging its glossy paint finish.

e. Degreasing of machinery parts by dipping in this liquid

f. Degreasing of oil-quenched forgings and cleaning of quenching oil from floors.

The best industrial eco-friendly oil-cleaning liquid for
effortless cleaning of your machinery and shop-floors

O-CLEAN3 is water based solution for cleaning surfaces contaminated with oil, grease and lubricants. It is very useful for cleaning machinery without damaging paint finish, cleaning industrialfloors,chequered plates, oily metal burr from trays and degreasing of metal parts. It is used as effective hand-wash to clean off oil from workmens’ hands.

O-CLEAN3 industrial cleaning solution works by dissolving oil, grease and lubrican Subsequently, the dissolved oil and impurities can be completely removed from the industrialfloor I equipment by cleaning with water. Use of harmful acids and inflamma­ ble kerosene, scraping or repeated scrubbing is avoided.

BENEFITS OF USING Oi CLEANING SOLUTIONS MANUFACTURED BY US:

  1. Removes oil and dirt from machinery,w ithout affecting paint
  2. Removes solid layer of oil and dust settled on floor for many Manpower and time for cleaning will be substantially reduced.
  3. Completely cleans off oil from workmen’s oily hands without causing dryness, burning or peeling of hands

O-CLEAN3 industrial cleaning solution works by dissolving oil, grease and lubrican Subsequently, the dissolved oil and impurities can be completely removed from the industrialfloor equipment by cleaning with water. Use of harmful acids and inflamma­ ble kerosene, scraping or repeated scrubbing is avoided.